In order to make large vehicles more visible, the Vehicle Regulations have incorporated a new reflective contour marking sign, called V-2011, since 23. This device allows the rear and side perimeter of vehicles to be seen in low visibility conditions. It consists of reflective strips 5 centimetres wide, white or yellow for the sides and red for the rear, which are placed at the ends of the box, marking the perimeter of the trailer. The reflective tapes that we sell at Ryme Automotive are easy to apply, are distributed in specialized stores and points of sale, are visible from more than 500 meters away from all angles and last around 7 years.

As regards the physical visibility of roadside assistance operations, Article 5, section 3 of the regulation established that it was mandatory for these vehicles to be provided with the V-2 (Vehicle obstructing the road) and V-23 (freight transport vehicle sign) signs in accordance with the provisions of Annex XI of the General Vehicle Regulations.

In December 2022, the regulation was amended by Royal Decree 1030/2022, the second transitional provision of which established a period of two years from the entry into force of the aforementioned regulation to comply with the provisions therein in relation to signals V2 and V23. Therefore, roadside assistance operators will have until December 22, 2024. to adapt vehicle signage to the provisions of the roadside assistance regulations.

How should the V23 sign be placed on a Truck, Platform or Gondola?

The V23 signal It must be installed on the perimeter of the rear and side of the vehicles, that is, at the endsIn this way, the outline or, failing that, the total length and width of the vehicle or its loads are identified.

Bodywork and Signalling Catalogue

In this catalogue you can find our full range of reflective tape for vehicle marking.